OUR PRODUCT
Forge Flanges
 
 
Blind Flange  
   
Details
 
We are one of the leading manufacturers and suppliers of an extensive range of flanges, we offer blind flanges that are high on utility. These blind flanges are used to close the ends of valves, pressure vessel openings, pipes and other channels where one end needs to be blocked. Made with top quality raw material, these blind flanges are high on durability and performance. Our blind flanges can be customized on various parameters, that the client might feel suitable.

A Blind Flange is which has no bore, and is used to close ends of piping systems. A blind flange also permits easy access to a line ones it has been sealed. The blind flange is sometimes machined to accept a pipe of the nominal Size to which reduction is being made. The reduction can be either threaded or welded.
Material Used
  • Mild Steel Steel
  • Stainless Steel
  • Cast Iron
  • Aluminum
  • Carbon Steel
  • Titanium
 
FEATURES
  • Blind flanges are sometimes supplied with NPT fittings which allow pressure test
  • Connections to be fitted
  • These are used to blank off the ends of pipe
  • Used to blank off the ends of valves and pressure vessel opening
  • Considering factors like internal pressure and bolt loading, blind flanges, especially in the larger sizes, are the most highly stressed of all types of flanges
  • Since the maximum stresses in a blind flange are bending stresses at the center, these can safely be allowed to be higher than in other types of flanges
  • Blind flanges are made to fit standard pipes in all sizes
 
View Chart
Slip-On Flanges  
   
Details
 
A Slip-On Flange is bored sightly larger than the outer Diameter of the matching pipe. The pipe slip into the flange prior to welding both inside and outside to prevent leaks.The British standard flanges manufactured by us pertain to all standards like BS10 1962 Table D,E,F,H IS 6392 Table 5,17,26 IS 1538 in slip. These are manufactured using mild steel both in slip-on and blind type. Our quality slip on flanges are ideal for lower pressure applications. Their ease of fitting and welding reduces fabrication costs. Our professional engineering team is involved in innovating durable and high-quality products to cater to our clients' needs. Detailed Product Description of Slip-On Flange :-The slip-on flange has a low hub because the pipe slips into the flange prior to welding. It is welded both inside and out to provide sufficient strength and prevent leakage. They are ideal for low pressure applications.

We offer an extensive range of Slip on Flanges, which is a very popular type of pipe flanges. These flanges slide over the end of piping and then welded in place. Slips on Flanges are perfect for lower pressure applications and can be easily fitted & welded into different pipes. The welding helps to reduce the fabrication costs of these pipes. We offer our range in wide variety of sizes for various applications.
Material Used
  • Mild Steel Steel
  • Stainless Steel
  • Cast Iron
  • Aluminum
  • Carbon Steel
  • Titanium
 
FEATURES
  • These are generally not preferred for high pressure temperature environments
  • One size fits all pipe schedules
  • The smaller thickness of this flange allows for easier alignment of bolting holes
  • Fabricators can more easily cut pipe to flanges length for slip-on flanges
 
ADVANTAGES OF SLIP ON FLANGES
  • Low cost installation
  • Less time needed to spent on ensuring the accuracy of the cut pipe
  • They are easier to align
  • The slip-on flanges have low hub because the pipe slips into the flange before welding
  • The flange is welded both inside and outside to provide sufficient strength
  • Prevent leakage
 
View Chart
Weld Neck Flanges  
   
Details
 
Weld Neck Flanges are drilled (machined) with the wall thickness of the flange having the same dimensions of the matching pipe, the lighter the pipe is, the larger the bore, conversely, the heavier the pipe, the small the bore, they are normally used for high pressure, cold or hot temperature.

Weld Neck Flanges are used with pipes. We are manufacturing an extensive range of flanges by using premium quality raw material and latest technology. Our flanges are highly acclaimed in several international markets for dimensional accuracy, corrosion resistance and high strength. We are one of the best manufacturer and exporter of Weld Neck Flanges.
Nominal Pipe Size Gasket Inside Diameter (ID)
(inch)
Gasket Outside Diameter (OD)
(inches)
Class 300 Class 400 Class 600 Class 900
1/2 0.84 2.12 2.12 2.12 2.50
3/4 1.06 2.62 2.62 2.62 2.75
1 1.31 2.88 2.88 2.88 3.12
1 1/4 1.66 3.25 3.25 3.25 3.50
1 1/2 1.91 3.75 3.75 3.75 3.88
2 2.38 4.38 4.38 4.38 5.62
2 1/2 2.88 5.12 5.12 5.12 6.50
3 3.50 5.88 5.88 5.88 6.62
4 4.50 7.12 7.00 7.62 8.12
5 5.56 8.50 8.38 9.50 9.75
6 6.62 9.88 9.75 10.50 11.38
8 8.62 12.12 12.00 12.62 14.12
10 10.75 14.25 14.12 15.75 17.12
12 12.75 16.62 16.50 18.00 19.62